Color & Comfort Color & Comfort

Misting or slinging

Misting or slinging

Misting or slinging

Ink "globs" are being thrown onto the web

Adjust ink/water balance. Use mourning bands. Refer to DIC India mourning band technical notes

Ink/water setting is out of balance

Adjust settings to get a good balance for better results

Roller train is affected by static electricity

Check to ensure press is properly grounded

Rollers are worn or improperly set

To change the worn out rollers and also check the roller settings

Too much ink is being carried in an effort to achieve the desired density

Substitute a stronger ink and run a thinner ink film on rollers

Viscosity of the ink is too low

Consult your DIC India representative

Web is running narrower than press width

Use mourning bands on plate. Refer to DIC India mourning band technical notes

For more information, please contact us.

Connect with DIC

COPYRIGHT © DIC CORPORATION ALL RIGHTS RESERVED.